Noise Suppressing Enclosure Improves User Experience with a 55% Noise Reduction
August 14, 2018…inTEST Thermal Solutions (iTS), Mansfield, MA (inTESTthermal.com)… iTS, manufacturer of the Temptronic® ThermoStream® air forcing system, has developed an enclosure that provides a 55% reduction in the noise caused by forced air during electronics thermal cycling. Electronics testing often requires concentrated air flow to rapidly transition components to specified temperature in a test enclosure. iTS’s new enclosure, called the ECO Quiet Cap connects to the ThermoStream’s air nozzle to reduce the noise and isolate the test subjects.
Low Noise Plates Provide Rapid, Accurate Thermal Cycling of Microwave/RF Devices
Sigma Systems, part of the inTEST Thermal Solutions family, has engineered a series of rack mountable thermal platforms used for thermal cycling of microwave/RF components during signal integrity testing.
Capable of -100 to +200°C with ±1.0°C accuracy, the plates are integrated with the test equipment to provide rapid, precise temperature control for high throughput, production level testing of microwave/RF devices.
With many Microwave/RF applications being highly susceptible to electromagnetic interference (EMI), Sigma Systems has designed the platforms with a Remote Electrical Box (REB) that separates the plate’s noise emitting components away from the test site and provides EMI shielding.
Low-Gradient, High-Throughput Convection Chamber Replaces Oil Baths
Sigma Systems, part of the inTEST Thermal Solutions family, has designed a high throughput thermal chamber for batch testing crystal oscillators.
Capable of -60 to +130°C with a low (±1.3°C) gradient, the chamber delivers the thermal horsepower and uniformity for batch testing up to 1,000 TCXOs across 10 load boards, surpassing the throughput of traditional oil baths and eliminating oil cleanup.
The chamber also simplifies setup and connection of test equipment for crystal parameter analysis during tests for phase noise, short term stability, frequency aging, and reliability screening.
For high flow thermal conditioning of electronic modules
This bench top system is ideal for conditioning electronics with high volume, low pressure, temperature controlled air. The system delivers up to 43scfm of precisely controlled, clean dry air for conditioning components and instrumentation. It is capable of cycling and holding at temperatures from 20 to 70°C.
These thermal systems provide precision temperature control for MIL-AERO component characterization, testing, and production.
Materials testing often requires a long and narrow cavity to accommodate measurement devices. With tensile testing, objects are pulled in one direction and stressed until failure, but strain can also be used to pull the object in both directions. Customizing chambers for the OEM and end-user is what we do best.
With a remote compressor upgrade kit
ThermoStream models with built-in compressors are great for temperature testing with forced air when no facility air supply is available. The new upgrade kit for ATS-535 and -635 models makes using a ThermoStream in lab and office environments much quieter.
A temperature chamber capable of long dwell times and wide temperature ranges (-55 to 500°C) for Electro/Stress Migration, Time Dependent Dielectric Breakdown, and Hot Carrier / Vt Stability Tests.
Thermal Plate integrates directly with vacuum bell jar for RF device testing
inTEST Thermal Solutions has designed a thermal cycling plate that integrates directly with a customer’s vacuum bell jar for space and altitude testing of RF modules, microwave components, and high power devices. The wide temperature range and stability of the plate is ideal for both thermal stressing of electronics and long periods of power supply testing.
Temperature Cycling Travelling Wave Tubes (TWTs)
inTEST Thermal Solutions (iTS) has designed a multi-zone thermal plate for hot/cold temperature cycling of microwave signal amplifiers used in satellite data communications. The heart of the amplifier is a travelling wave tube (TWT) and power supply.